Disclaimer
1. Liability for content
The contents of my pages were created with great care. However, I cannot guarantee that the content is correct, complete or up to date. As a service provider, I am responsible for my own content on these pages in accordance with general law in accordance with § 7 section 1 TMG. According to §§ 8 to 10 TMG, as a service provider, I am not obliged to monitor transmitted or stored third-party information or to research circumstances that indicate illegal activity. Obligations to remove or block the use of information under general law remain unaffected. Liability in this regard is only possible from the point in time at which we become aware of a specific legal violation. I will remove this content immediately if I become aware of such legal violations.
2. Liability for links
My website contains links to external third party websites, over whose content I have no influence. Therefore, I cannot accept any liability for this third-party content. The respective provider or operator of the pages is always responsible for the content of the linked pages. The linked pages were checked for possible legal violations at the time they were linked. No illegal content was found at the time the link was created. Permanent monitoring of the content of the linked pages is not reasonable without concrete evidence of a violation of the law. If I become aware of legal violations, I will remove such links immediately.
3. Copyright
The content and works on these pages created by the website operator are subject to German copyright law. The duplication, processing, distribution and any kind of exploitation outside the limits of copyright law require the written consent of the respective author or creator. Downloads and copies of this website are only permitted for private, non-commercial use. Insofar as the content on this site was not created by the operator, the copyrights of third parties are observed. In particular contents of third parties are marked as such. If you should nevertheless become aware of a copyright infringement, please notify me accordingly. If I become aware of legal violations, I will remove such content immediately.
4. Use
The use of my website is usually possible without providing personal data. As far as personal data (e.g. family name, address or email address) is collected on my website, this is always done on a voluntary basis as far as possible. These data will not be passed on to third parties without your express consent.
I would like to point out that data transmission over the Internet (e.g. when communicating by email) can have security gaps. A complete protection of the data against access by third parties is not possible.
We hereby expressly object to the use of the contact data published in the context of the imprint obligation by third parties for sending unsolicited advertising and information material. I expressly reserve the right to take legal steps in the event of unsolicited sending of advertising information, for example through spam mail.
5. Alternative dispute resolution
The EU Commission provides a platform for online dispute resolution on the Internet under the following link: ec.europa.eu/consumers/odr This platform serves as a point of contact for the out-of-court settlement of disputes arising from online sales or service contracts which a consumer is involved. According to §§ 36, 37 VSBG I point out that I do not take part in a dispute settlement procedure of a dispute settlement body. And neither am I obliged to.
Picture Copyright List
- Aluminum-printing-plate (© https://creativecommons.org/licenses/by-sa/4.0/deed.en / https://www.moralin.net/fileadmin/user_upload/TCUP/pic/own/3dprinter/20210602_170300.jpg)
- Firmware-programming (© https://creativecommons.org/licenses/by-sa/4.0/deed.en / https://www.moralin.net/fileadmin/user_upload/TCUP/pic/own/3dprinter/costom-firmware.PNG)
- 3D-printer-graphic (© https://creativecommons.org/licenses/by-sa/4.0/deed.en / https://www.moralin.net/fileadmin/user_upload/TCUP/pic/own/3dprinter/example4.png)
- markus-spiske-iar-afB0QQw-unsplash.jpg (© https://unsplash.com/license / https://unsplash.com/photos/iar-afB0QQw)
- Aluminum-printing-plate (© https://creativecommons.org/licenses/by-sa/4.0/deed.en / https://www.moralin.net/fileadmin/user_upload/TCUP/pic/own/3dprinter/20210602_170300.jpg)
- jonas-morgner-F7u5fL11Lt0-unsplash-1600x2400.jpg (© https://unsplash.com/license / https://unsplash.com/photos/F7u5fL11Lt0)
- magnet-me-9rierf0Y-QY-unsplash-edit.jpg (© https://unsplash.com/license / https://unsplash.com/@magnetme)
- balazs-ketyi-sScmok4Iq1o-unsplash-edit.jpg (© https://unsplash.com/license / https://unsplash.com/photos/sScmok4Iq1o)
- possessed-photography-dRMQiAubdws-unsplash-1920x1470.jpg (© https://unsplash.com/license / https://unsplash.com/photos/dRMQiAubdws)
- thisisengineering-raeng-L7TdJ3WQfcI-unsplash1920x2880.jpg (© https://unsplash.com/license / https://unsplash.com/photos/L7TdJ3WQfcI)
- mastars-qKKyb0bk6yM_lVjPEIx1Xew-unsplash-edit.png (© https://unsplash.com/license / https://unsplash.com/photos/lVjPEIx1Xew, https://unsplash.com/photos/qKKyb0bk6yM)
- kumpan-electric-SYo5eazBrls-unsplash.jpg (© https://unsplash.com/license / https://unsplash.com/photos/SYo5eazBrls)
- BL-Touch_Montagewinkel.JPG (© CC BY-NC-SA 4.0 / www.moralin.net)
- Arduino Librarymanager (© CC BY-NC-SA 4.0 / www.moralin.net)
- BL-Touch mounting bracket for direct infeed from Microswiss.STL (© CC BY-NC-SA 4.0 / www.moralin.net)
- Sample program Arbeitszeiterfassung (© CC BY-NC 4.0 DE)
- Laser-engraving-machine.jpg (© https://creativecommons.org/licenses/by-sa/4.0/deed.de)
- Laser-mounted-on-carriage (© https://creativecommons.org/licenses/by-sa/4.0/deed.de)
- Collection of construction files (© https://creativecommons.org/licenses/by-sa/4.0/deed.de)
- mounting bracket (© https://creativecommons.org/licenses/by-sa/4.0/deed.de)
- Power pack profile clamp (© https://creativecommons.org/licenses/by-sa/4.0/deed.de)
- PSU holder and driver holder (© https://creativecommons.org/licenses/by-sa/4.0/deed.de)
- PSU mounting plate (© https://creativecommons.org/licenses/by-sa/4.0/deed.dehttps://creativecommons.org/licenses/by-sa/4.0/deed.de)
- XLoader window (© https://creativecommons.org/licenses/by-sa/4.0/deed.de)
- Sled drag chain adapter (© https://creativecommons.org/licenses/by-sa/4.0/deed.de)
- Y-axis drag chain adapter (© https://creativecommons.org/licenses/by-sa/4.0/deed.de)
- Drag chain mounting link adapter (© https://creativecommons.org/licenses/by-sa/4.0/deed.de)
- GRBL Settings (© https://creativecommons.org/licenses/by-sa/4.0/deed.de)
- Laser controller rewired (© https://creativecommons.org/licenses/by-sa/4.0/deed.de / https://www.moralin.net/fileadmin/user_upload/TCUP/pic/own/nejeupgrade/Neuverdrahtet.jpg)
- Laser control unit (© https://creativecommons.org/licenses/by-sa/4.0/deed.de)
- Laser tester (© https://creativecommons.org/licenses/by-sa/4.0/deed.de)
- Built-in laser driver (© https://creativecommons.org/licenses/by-sa/4.0/deed.de)
- Laser similar to NejeA40640 (© https://creativecommons.org/licenses/by-sa/4.0/deed.de)
- Laser-mounted-on-carriage (© https://creativecommons.org/licenses/by-sa/4.0/deed.de)
- Laptop with LaserGRBL (© https://creativecommons.org/licenses/by-sa/4.0/deed.de)
- LEM top-view (© https://creativecommons.org/licenses/by-sa/4.0/deed.de)
- LEM-Laser-mount (© https://creativecommons.org/licenses/by-sa/4.0/deed.de)
- LEM Driver and Power Supply (© https://creativecommons.org/licenses/by-sa/4.0/deed.de)
- Mounted suspension (© https://creativecommons.org/licenses/by-sa/4.0/deed.de)
- Engineered suspension (© https://creativecommons.org/licenses/by-sa/4.0/deed.de)
- Game board maze.jpg (© CC BY-NC 4.0 DE / https://www.thomas-paulussen.de)
- LayrinthImKarton1920k.jpg (© CC BY-NC 4.0 DE / https://www.thomas-paulussen.de)
- MeinLabyrinthRegeln1.jpg (© CC BY-NC 4.0 DE / https://www.thomas-paulussen.de)
- MeinLabyrinthRegeln2.jpg (© CC BY-NC 4.0 DE / https://www.thomas-paulussen.de)
- LabyrinthKarten.jpg (© CC BY-NC 4.0 DE / https://www.thomas-paulussen.de)
- LabyrinthTeile.jpg (© CC BY-NC 4.0 DE / https://www.thomas-paulussen.de)
- print-chest.jpg (© CC BY-NC 4.0 DE / https://www.thomas-paulussen.de)
- LayrinthImKarton1920k.jpg (© CC BY-NC 4.0 DE / https://www.thomas-paulussen.de)
- LayrinthImKarton1920k.jpg (© CC BY-NC 4.0 DE / https://www.thomas-paulussen.de)
- ImLabyrinth.jpg (© CC BY-NC 4.0 DE / https://www.thomas-paulussen.de)
- Blender Animation: Laser engraving machine (© CC BY-NC 4.0 DE / https://www.thomas-paulussen.de)
- LaserEngarvingMachine6855-0001.jpg (© CC BY-NC 4.0 DE / https://www.thomas-paulussen.de)
- [Translate to English:] (© [Translate to English:] )
- [Translate to English:] (© [Translate to English:] )